Azure Resource Mover makes it really easy to move your resources, like Azure VMs, across regions. There are some minor details you need to take care to have the whole process run smoothly.

Let’s see how we can move our VM from a region to an other with simple steps

1. At the Azure Portal search for “Azure Resource Mover”

2. At the Azure Resource Mover” wizard click “Move across regions”

3. Select the source & target region

4. select the resources you want to move

5. Accept the notification and start he process and go to the “Across Regions” option and press “Validate dependencies” button in the middle

6. After the validation, check the Issues column of all resources and resolve if any.

7. First we need to move the Resource Groups only. The move process has four steps, the Prepare, the Initiate Move , the Commit move and finally delete the source resources.  So, select only all the “resources groups” and press “Prepare”

8. Select again the Resource Groups and press “Initiate Move”

9. Select gain the Resource Groups and press “Commit Move”

10. Now the Resource Groups are created at the target region, and is at pending deletion at the source. We can proceed with the rest resources. Select the rest resources and go through the same process, the Prepare, the Initiate Move , the Commit move and finally delete the source resources.

At the Prepare state, the Azure Site Recovery agent is installed at the VM and the data are replicated to the target region. This takes a lot of time, depending on the size of the data but it does not affect the VM.

Sneak peak: You can view the process of the VM, by navigating to the VM blade and go to the Disaster Recovery setting

11. Once all resources are in “Initiate move” pending state, select them and press “Initiate Move”. ATTENTION: at this state, there will be downtime to move the VMs. The source VMs will show down, a final data sync will be performed and finally the target VMs will start.

12. Wait until all resources are at the Commit Move state, select them and press “Commit Move”

at this state, we can see that we have two resource groups, the source and the target:

At the source resource group, the VMs will be stopped and at the target started. Note here that the target IP is not the same as the Source. Your Public IPs will be altered.

13. After the commit move, you will need to delete the source resources manually.

More info at: About the move process in Azure Resource Mover | Microsoft Docs

Pantelis Apostolidis

Pantelis Apostolidis is a Sr. Specialist, Azure at Microsoft and a former Microsoft Azure MVP. For the last 20 years, Pantelis has been involved to major cloud projects in Greece and abroad, helping companies to adopt and deploy cloud technologies, driving business value. He is entitled to a lot of Microsoft Expert Certifications, demonstrating his proven experience in delivering high quality solutions. He is an author, blogger and he is acting as a spokesperson for conferences, workshops and webinars. He is also an active member of several communities as a moderator in azureheads.gr and autoexec.gr. Follow him on Twitter @papostolidis.

www.cloudcorner.gr

The post Move your Azure VM across regions appeared first on Apostolidis Cloud Corner.

At this post we will see how easily we can move azure resources to new resource groups or subscriptions and how we can validate if the azure resources are eligible to move without initiate the move. The idea came from my colleague John Dandelis, who also helped with the https://www.e-apostolidis.gr/microsoft/azure/high-level-steps-create-syslog-server-azure-oms-log-analytics/ post.

Move Azure Resources to new resource groups or subscriptions

Azure Resource Manager allow you to easily move resources to new resource groups or subscriptions. It is a pretty simple process. From the Azure Portal, open a Resource Group, and from the top options click Move. You can select if you want to move to another resource group or subscription.

On the next page you can select the resources you want to move and click OK. Once you click OK, the Azure Resource Manager starts to validate the move requests. Checks if the selected resources are eligible to move and also if they have any dependencies that will cause the move to fail.

After the validation, and if the validation is successful, the resource move starts. There is no option in the portal to just validate the move request without starting the move.

Validate Resource Move with Postman

To validate the resources move you need to use post / get operations. The https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-group-move-resources#validate-move document descibes the parameters that we must use to validate is the resources are eligible to move. To validate if the resources are eligible to move we need to send a URI with Authorization token. A free and easy application to help us with the post /get requests is the Postman. You can download the latest release form this link: https://www.getpostman.com/downloads/

Download and install the Postman and open the application. We need to perform a Post request to ask the ARM if the specific resources are eligible to move and then a GET request to view the ARM response.

At the Postman select POST and at the POST request URL enter:

https://management.azure.com/subscriptions/{subscriptionId}/resourceGroups/{sourceResourceGroupName}/validateMoveResources?api-version=2019-05-01

My test case URL:

https://management.azure.com/subscriptions/784f8ed8-33f0-497c-b1c8-1ca9833be590/resourceGroups/devrg/validateMoveResources?api-version=2019-05-01

Then at the Body, select RAW -> json and paste the request:

{ “resources”: [“<resource-id-1>”, “<resource-id-2>”], “targetResourceGroup”: “/subscriptions/<subscription-id>/resourceGroups/<target-group>” }

at my example that I want to validate two resources, the devrg VM and the Managed disk I entered:

{
“resources”: [“/subscriptions/784f8ed8-33f0-497c-b1c8-1ca9833be590/resourceGroups/devrg/providers/Microsoft.Compute/virtualMachines/devrgvm”, “/subscriptions/784f8ed8-33f0-497c-b1c8-1ca9833be590/resourceGroups/DEVRG/providers/Microsoft.Compute/disks/devrgvm_OsDisk_1_5da9dad62662418b9bb3f02496e88604”],
“targetResourceGroup”: “/subscriptions/784f8ed8-33f0-497c-b1c8-1ca9833be590/resourceGroups/target”
}

Create Authorization Token

Finally we need an authorization token to access the ARM API. At the Azure Portal open the cloud shell, buy clicking the icon at the top right menu bar.

Enter the below command to create a service principal at the Azure Active Directory:

az ad sp create-for-rbac -n “my-access-app”

The output will be as the below screenshot:

You will get the application ID, URL, tenant ID and password. Next at the Postman press the + button to create a new tab

At the Postman’s new tab create a new POST and enter:

https://login.microsoftonline.com/{{tenantId}}/oauth2/token

My test:

https://login.microsoftonline.com/85ed7d07-ffa3-44da-a22a-38c51ba14d0e/oauth2/token

Then at the Body property, select “x-www-form-urlencoded” and enter the following KEYs:

my test:

Once you press “Send” it will return the “access_tocket”. This is the Authorization: Bearer <bearer-token> needed for the resource move validation.

Send the validation request

Back to the first tab of the Postman, where we are preparing the move validation POST request, select “Authorization”, at the TYPE select “Bearer Token” and at the Token field paste the “access_tocken” from above. Then press “Send”

If all the details are correct, it will return a status of “202 Accepted”. This means that the ARM has started the validation. Copy the “Location” value because we will need it below.

The next step is to create a GET request to view the validation result. The GET request consists of the location URL and the Authorization token. As we did before, open a new Tab at the Postman, select GET request, at the GET URL paste the “Location” URL, at the TYPE select “Bearer Token” and at the Token field enter the “access_token”.

Receive the validation results

Press enter to GET the validation results. f the move operation validates successfully, you receive the 204 status code and nothing at the Body.

If the move validation fails, you receive an error message, like the below. At my example the validation returned failed. The error message explains what caused the failure. At my example the VM is being backed up so the disks have restore points. Also at the message it gives us the link to check for more information.

Pantelis Apostolidis

Pantelis Apostolidis is a Sr. Specialist, Azure at Microsoft and a former Microsoft Azure MVP. For the last 20 years, Pantelis has been involved to major cloud projects in Greece and abroad, helping companies to adopt and deploy cloud technologies, driving business value. He is entitled to a lot of Microsoft Expert Certifications, demonstrating his proven experience in delivering high quality solutions. He is an author, blogger and he is acting as a spokesperson for conferences, workshops and webinars. He is also an active member of several communities as a moderator in azureheads.gr and autoexec.gr. Follow him on Twitter @papostolidis.

www.cloudcorner.gr

The post Validate Azure Resource Move with Postman appeared first on Apostolidis Cloud Corner.